Rule Rule-Mate 2000 GPH Fully Automated Bilge Pump – 24V [RM2000A-24]

Description

Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump

The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2″ and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8″.
tt
Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to “check” for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2″ and shutting off at 5/8″.

• 2000 GPH (7570 LPH) at 0′ (27.2V)
• All-in-one pump and switch
• Extra long life heavy duty motor
• 1″ NPS discharge with 1″ AND 1 1/8″ screw-on ports
• Three year warranty

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Specifications:

• Volts: 24v
• Operation: Automatic
• Gallons Per Minute: 33.3 GPM
• Gallons Per Hour: 2000 GPH
• Type: Electric
• Box Dimensions: 5″H x 7″W x 8″L WT: 4.35 lbs
• UPC: 042237114303

Owner’s Manual (pdf)